Module:Location map/data/Republic of the Congo

File:Congo, Republic of the-CIA WFB Map.png

Map of the Republic of the Congo

Module:Location map/data/Republic of the Congo is a location map definition used to overlay markers and labels on an equirectangular projection map of Republic of the Congo. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Republic of the Congo":

• Template:Tlx
• Template:Tlx
• Template:Tlx
• Template:Tlx

Map definition

• name = Republic of the Congo

  Name used in the default map caption

• image = Congo location map.svg

  The default map image, without "Image:" or "File:"

• image1 = Congo physical map.svg

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• top = 3.736

  Latitude at top edge of map, in decimal degrees

• bottom = -5.76

  Latitude at bottom edge of map, in decimal degrees

• left = 10.29

  Longitude at left edge of map, in decimal degrees

• right = 19.126

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 8.836 degrees.

• At an image width of 200 pixels, that is 0.0442 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0088 degrees per pixel.

Latitude: from North to South this map definition covers 9.496 degrees.

• At an image height of 200 pixels, that is 0.0475 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0095 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

{{Location map | Republic of the Congo
| width   = 250
| lat_deg = -4.27
| lon_deg = 15.29
| label   = Brazzaville
}}

Template:Clear

Location map many, using relief map (image1)

{{Location map many | Republic of the Congo
| relief   = yes
| width    = 250
| caption  = Locations in the Republic of the Congo
| lat1_deg = -4.27
| lon1_deg = 15.29
| label1   = Brazzaville
| lat2_deg = 1.63
| lon2_deg = 18.07
| label2   = Impfondo
}}

Template:Clear

Location map+, using AlternativeMap

{{Location map+ | Republic of the Congo
| AlternativeMap = Congo physical map.svg
| width   = 250
| caption = Locations in the Republic of the Congo
| places  =
  {{Location map~ | Republic of the Congo
  | lat_deg = -4.27
  | lon_deg = 15.29
  | label   = Brazzaville
  }}
  {{Location map~ | Republic of the Congo
  | lat_deg = 1.63
  | lon_deg = 18.07
  | label   = Impfondo
  }}
}}

Template:Clear

See also

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

---

return {
	name = 'Republic of the Congo',
	top = 3.736,
	bottom = -5.760,
	left = 10.290,
	right = 19.126,
	image = 'Congo location map.svg',
	image1 = 'Congo physical map.svg'
}